Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > BMW Tech
BMW Tech BMW Tech Forum - For Questions specific and of interest to BMW riders only.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 2 Aug 2004
Registered Users
New on the HUBB
 
Join Date: Aug 2004
Location: Medellin, Colombia
Posts: 1
1150GS engine knocking and pinging. PLEASE HELP

Hello,
I recently changed my 1100gs for a 2001 1150gs. I really like this bike, however I noticed tha the engine knocking and pinging occurs frequently. Any solution??? Please notice that I live in Colombia (South America) where the fuel quality is low.
Reply With Quote
  #2  
Old 2 Aug 2004
Grant Johnson's Avatar
HU Founder
Veteran HUBBer
 
Join Date: Dec 1997
Location: BC Canada
Posts: 7,216
How is it on better quality fuel when you can get it? If it's okay, then:

There is available - or WAS - MAY not be now - a replacement chip for the fuel management system to retard the timing and adjust for poor quality fuel. Check with your BMW dealer.

In the meantime, ride it gently so that it isn't pinging - keep pinging a lot and you will damage the engine, expensively. Low throttle openings and higher revs is better.

Good luck.

------------------
Grant Johnson

Seek, and ye shall find.

------------------------

One world, Two wheels.
www.HorizonsUnlimited.com
__________________
Grant Johnson
Seek, and ye shall find.

------------------------
Inspiring, Informing and Connecting travellers since 1997!
www.HorizonsUnlimited.com
Reply With Quote
  #3  
Old 3 Sep 2004
MoroCycler's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Apr 2003
Location: Guadalajara, Jalisco, Mexico
Posts: 164
Hi.
I read somewhere that you can go to a BMW dealer and have them re-program the ignition advance curve. I guess there is like two choices, regular and retarded. Ask, this will solve the problem.
But the root of the problem might be fuel quality, this happens some times here in Mexico also, when I travel to small towns where they dont sell much fuel so it gets little rotten. Also some nasty guys mix it with cheap solvents, what we call "adulterar" and you will get a musical "marimba" out og your GS airheads!
You can buy some Hi-octane aditive, it helps sometimes depending on the brand of it.
But if you hear it most of the time, be carefull and do not roll the throtle all the way, just little by little , otherwise you could regret it.
Good Luck
Humberto

------------------
Life is the process of making known the unknown. MOROcycler
__________________
THE Motorcycle JOURNEY is making known the unknown.
http://www.morocycler.smugmug.com
Reply With Quote
  #4  
Old 4 Sep 2004
Registered Users
HUBB regular
 
Join Date: Aug 2004
Location: Barcelona, Spain
Posts: 68
fuel quality is a factor . But pinging/detontations are an issue on my bike and we have 95 and 98 octane fuel in Spain. It usually seem to be related to hot weather and short urban rides. I have also had cam chain slap from the left hand cylinder. Its loud and not pleasant. There is a new revised cam chain tensioner available. i am going to try to make the dealer change it (I dont suppose Ill have much luck, I´ll try).
bob
Reply With Quote
  #5  
Old 6 Sep 2004
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2002
Location: Sydney, NSW, Australia
Posts: 1,362
I agree with Grant.
Avoid riding with lots of throttle at low rpms.

If you find there is no modification avalible then you could try retarding the system by changing the hall effect plate position ... a few (1, 2, 3, 4 not 10, 20!) degrees - score a mark as to where it is now and then move it a little .. if you go the wrong way (advancing rather than retarding) the pining will get worse and the bike may get difficult to start. Looking at the diagrams on http://users.rcn.com/dehager/service...ll_sensors.pdf
you should move the plate counter clockwise.


__________________
---
Regards Frank Warner
motorcycles BMW R80 G/S 1981, BMW K11LT 1993, BMW K75 G/S
Reply With Quote
  #6  
Old 22 Dec 2004
Registered Users
HUBB regular
 
Join Date: May 2004
Location: Billericay, Essex, England
Posts: 27
I've just bought a brand new (2004) R1150GS Adventure and have not yet done 500 miles on it, but I've noticed a loud rattly/tapping noise between 2300 and about 2800 RPM on gentle throttle, I've also now noticed a knocking between 1500 and 3000 at all throttle positions making the engine feel very rough sending vibes up through the bike. The engine oil level is good, and as I say the bike if 'brand new!'. This is my first BMW having owned several sports bikes as well as an XT600Z Tenere (which is for sale by the way), yet have never experienced this type of thing. These taps and knocks can't be right can they? I'm due to have the bike checked at BMW battersea for the initial 600 mile check a few days after christmas, I'll be pointing this out to them, but should I demand an explanation and a fix, or is this a 'quirk' of the boxer engine?

Your advice will be most welcome.
Thanks,
Craig....
Reply With Quote
  #7  
Old 23 Dec 2004
Steve Pickford's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Jul 2003
Location: Oxford, UK
Posts: 994
My 1150GS used to make constant loud noises.

Once you've eliminated fuel quality & ignition timing variables, consider the following:

I read a couple of threads on the Adv. Rider site re: noisy 1150's. One reason given was that the left hand cam chain tensioner was not up to the job. It allowed the chain to flap about a little & resonate at certain rpm. The recommended fix was the uprated tensioner from BMW, not cheap at £128.00 in the UK or £105.00 in Germany (where I bought mine).

My bike needed a service anyway & after doing nothing more than changing the engine oil, I fitted the new tensioner, the result was pretty impressive. On start up from a cold engine, it was immediately & significantly quieter at all rpm. It now sounded quieter standing next to the running bike with no helmet on than it used to while wearing earplugs & a helmet! I could now hear the ticking valves, sure sign a service was due!

The tensioner is both spring & hydraulically activated, the new part has a 30-40% stiffer spring & a smaller drain oil for the oil, together they provide the necessary tension. if you go this route, you'll need to unbolt the Telelever arm & slide it forwards to access the l/h tensioner as it sits on top of the cylinder, not below like the r/h part. I had a few problems her but resolved them (see second link) with help.

I can't guarantee this will fix your problem, it may not even be related but these two links are a worthwhile read for 1150 owners anyway:

http://www.advrider.com/forums/showt...noise+disaster

http://www.advrider.com/forums/showthread.php?t=62235

__________________
My photos: www.possu.smugmug.com
Reply With Quote
  #8  
Old 23 Dec 2004
Registered Users
Veteran HUBBer
 
Join Date: Sep 2003
Location: Estonia
Posts: 787
There could be many reasons:

Knocking and pinking:

- Carbon build up in combustion chamber as Grant and others stated before. Use fuel additive that will remove the buildup. Btw: my uncle uses very radical method cleaning up buidup and carbs - just washing pure water directly from bottle down to removed air filter room's hole to engine and at the same time revving warm engine enough that it can run with water/fuel mixture. After few minutes of "washing" like that the pistons head and cylinders look like brand new (absolutely no carbon)! Lot of massive black stuff (dissolved carbon) come out from exhaust during the operation. Indeed, i really don't recommend to try this "at home"! And i don't know how it reacts with katalyser if you have one on your GS.
- Incorrect or poor quality fuel
- Spark plug heat range incorect Use correct one.
- Improper air-fuel mixture Take the bike to BMW for diagnostics testing.
- Piston slap or rattling can make the bad sound too
- Cylinder-to-piston clearance excessive
- Connecting rod bent From over-revving or foreign object left in cylinder or trying to start badly flooded engine.
- Piston pin or piston pin bore worn or lack of lubrication
- Piston ring(s) worn
- Piston seizure damage Usually from the lack of lubrication or overheating.

Valve noise:

- Incorrect valve clearances
- Valve spring broken or weak
- Camshaft or auxillary shafts worn

Other noise:

- Cylinder head gasket leaking
- Exhaust pipe leaking at the cylinder head connection
- Crankshaft ronout excessive Caused by bent crankshaft (from over-revving) or damage from an upper cylinder component failure.
- Crankshaft bearing worn
- Crankshaft tensioner defective
- Camshaft tensioner defective
- Cam chain, sprockets or guides worn

Check the bike and try to remember if it could have suffered in someting in the past (i.e. overevving, overheating) - makes searching the fault easyer. If the bike is ridden easy with no harm then search for mostly spontaneousy occurring faults (i.e. camshaft tensioner etc)

Good luck, Margus

[This message has been edited by Margus (edited 23 December 2004).]
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 14:09.