Contact Overland Solutions for all your custom modifications and setup for overland travel.               Discover the extraordinary with Compass Expeditions.

Go Back   The HUBB > 4 wheels > 4WD Overland Tech

4WD Overland Tech GENERIC 4WD / 4 wheel TECH discussions and info that is valid for ALL brands. See brand specific forums.
With more than 58 destinations worldwide, Edelweiss Bike Travel is Number 1 in guided motorcycle tours!
Visit Matt Savage for VIAIR compressors, Air Lift Helper Springs, Tyre Levers, Chris Scott's Books & DVDs, KC Daylighters, Allisport Intercoolers, Overland Preparation and lots more!

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 5 Sep 2006
roamingyak.org's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2001
Location: Portugal
Posts: 850
Water containers

Can anybody recommend some kind of plastic water container other than the black plastic jerry can type ones? I find these leak when tipped on their side.

Ideally 10-30 litres and a more of a square shape...
Reply With Quote
  #2  
Old 5 Sep 2006
marker's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2002
Location: Bombinhas-Santa Catarina-Brazil
Posts: 214
beware that lightcoloured plastic jerrycans will get algae
Reply With Quote
  #3  
Old 5 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: the Netherlands
Posts: 220
containers/bidons/jerrycans/kanisters

Take a look into the world of mobile-homes (campervans) or yachting (inland and marine). Both worlds have their own range of supply-stores with almost everything you can think of. Depending where you are based, their must be atleast one of the two types in your neighbourhood.

They mostly have all sorts of containers/bidons/jerrycans/kanisters in stock in different sizes and shapes. Some for carrying, some for semi-/permanent installations.
The stores/supliers specialized in converting minibuses into campervans even offer very small, long containers 42x12x26cm (like Reimo).

Stay away of the jerry's with a tap at the bottem on one side, prone to damage and leaking.

Oh and both type of stores sell those little drops to avoid algea grow.

BTW maybe you only need new seals on the ones you have?

regards
__________________
bart & sophie
Reply With Quote
  #4  
Old 5 Sep 2006
marker's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Feb 2002
Location: Bombinhas-Santa Catarina-Brazil
Posts: 214
http://www.plastipro.nl/

for custommade tanks as well.
Reply With Quote
  #5  
Old 6 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: London (UK)
Posts: 749
Darrin,

http://www.caktanks.co.uk/
__________________
Roman (UK)
www.overlandcruiser.com
Reply With Quote
  #6  
Old 6 Sep 2006
marieandguy's Avatar
Contributing Member
HUBB regular
 
Join Date: Mar 2006
Location: on the road
Posts: 87
boats fuel tanks

its just an idea that i have for a long time now and it using a marine fuel tank as a water container for my landcruiser, i was thinking of a 12 gal. size, and those tanks really have higher standats then any other cotainer that i know of, due to marine regulations, they come in a large variety of shapes and have a large variety of accesories for them,and the price is reasonable.
well just an idea...

guy
__________________
love to all

www.guyandmarie.com
Reply With Quote
  #7  
Old 6 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: May 2006
Location: Bribie Island Australia
Posts: 458
On our Landie we use a 250mm dia white polypipe, its the type used for waste water services. Glue on end caps, with a glue on hose connector or fill tube, small tap at the low end. We cut the pipe to whatever length we wanted and fitted under the body, I've seen them mounted on a roof rack or across the vehicle.
Reply With Quote
  #8  
Old 6 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Jan 2004
Location: Manchester, UK
Posts: 454
""On our Landie we use a 250mm dia white polypipe, its the type used for waste water services. Glue on end caps, with a glue on hose connector or fill tube, small tap at the low end. We cut the pipe to whatever length we wanted and fitted under the body, I've seen them mounted on a roof rack or across the vehicle.""

--I like this idea, do you have any photos?

RE: Leakage. I have the same problem with the NATO jerries - especially on their sides in 110 side lockers. I think any plastic container stored on it's side is going to warp a little and leak a little around the cap seal when bashed around.

A 20l container, with jerry dimensions but the cap at the top (or side if you know what I mean!) would be a great find.
__________________
Pictures, Mauritania 2011
Reply With Quote
  #9  
Old 6 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Oct 2003
Location: the Netherlands
Posts: 220
some links

Some links to get the idea.

Like I mentioned the small jerrys (this time by woick)
http://www.woick.de/catalog/popup_image.php?pID=9120

A page out of the woick catalog, with a few universal water containers. http://www.woick.de/catalog/pdf/338.pdf
The 48 liter has the same dimensions (±48x35x29) as two standard army jerrys (2x ±48x35x16cm) leaving room for a tap and storage of a hose (!) for filling.
The pictured ones are rather expensive and have inlet and outlets on top for using with a pump. I use one with an outlet on the bottom, connected a small hose with a tap and let gravity do its work (80l. ±40x35x60, about 60euros).

BTW those jerry-sacs look very handy for the occasional expedition, anyone used them ? I know that some manufacteres make them too for petrol/diesel, but most of those are in odd shapes to stow in empty spaces in boats.

Same supplier, fuel-reservoirs.
http://www.woick.de/catalog/product_...oducts_id=8837

About DIY: sewage-pipes, very handy! We also spotted reservoirs made of steelpipes to replace the front and/or rear fenders, and even a bullbar filled with motoroil !

cheers
__________________
bart & sophie
Reply With Quote
  #10  
Old 6 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Feb 2006
Location: Pennsylvania,USA
Posts: 107
Check out some outdoor stores

I use a 5 gallon (in the US) container I got for a few dollars. They have various sizes though. It has a nozzle on the side for easy pouring. The nozzle also unscrews to make fill ups a no hassle event. It has a handle for easy transport and also makes securing it in the vehicle no problem.
Reply With Quote
  #11  
Old 7 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Dec 2003
Location: Wiltshire,UK
Posts: 238
I've a;ways got on OK with the military black jerry's, both when i was in the Barmy Army and now playing around as a civvy.

just as long as the rubber seal is ok though! i don't know where you can get genuine relpacements from, but a bit of cut up inner tube should do the trick i'd have thought.
Reply With Quote
  #12  
Old 8 Sep 2006
roamingyak.org's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2001
Location: Portugal
Posts: 850
Many thanks for all the replies - all very useful!

I was referring to the "black PLASTIC jerry can type ones" not the actual jerry can ones.

These are also supposed to be quite good...

http://www.dicks-armyshop.ch/index.p...lectedImage=65

Last edited by roamingyak.org; 8 Sep 2006 at 09:43.
Reply With Quote
  #13  
Old 8 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Dec 2003
Location: Wiltshire,UK
Posts: 238
Quote:
Originally Posted by roamingyak.org
Many thanks for all the replies - all very useful!

I was referring to the "black PLASTIC jerry can type ones" not the actual jerry can ones.

These are also supposed to be quite good...

http://www.dicks-armyshop.ch/index.p...lectedImage=65

Sorry Darrin, i was referring to the plastic ones too. maybe i've just been lucky with leak free ones! LOL!
Reply With Quote
  #14  
Old 8 Sep 2006
Moderator
Veteran HUBBer
 
Join Date: Jun 2005
Location: Ledbury, Herefordshire, UK
Posts: 276
Quote:
Originally Posted by RogerM
On our Landie we use a 250mm dia white polypipe, its the type used for waste water services. Glue on end caps, with a glue on hose connector or fill tube, small tap at the low end. We cut the pipe to whatever length we wanted and fitted under the body, I've seen them mounted on a roof rack or across the vehicle.
If you use a long pipe, don't you have problems with it sloshing aroung, you starting to get quite a weight of water there.
__________________
Cheers,

Julian Voelcker
Overland Cruisers - Specialising in Land Cruiser preparation and servicing.
_____________________________
Euro Land Cruiser Owners Club - See http://www.landcruiserclub.net for further details.
Reply With Quote
  #15  
Old 8 Sep 2006
Registered Users
Veteran HUBBer
 
Join Date: Jan 2004
Location: Manchester, UK
Posts: 454
Quote:
Originally Posted by JulianVoelcker
If you use a long pipe, don't you have problems with it sloshing aroung, you starting to get quite a weight of water there.
Was wondering about that, if it's at 90 degrees to the direction of travel then it's not really a problem, otherwise you could use a baffle, or just keep it 90% full.
__________________
Pictures, Mauritania 2011
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fuel / Water Libya to Niger petelewis Sahara Travel Forum 5 18 Mar 2004 21:34
finding small punctures when water is limited stephane TRAVEL Hints and Tips 1 8 Sep 2003 16:18
Dirt road riding techniques - your input please. gmarch Travellers' questions that don't fit anywhere else 4 23 Dec 2002 19:53
water supply Roy&Doede Sahara Travel Forum 8 31 May 2002 20:59
Water and fuel amount Erik D. Sahara Travel Forum 2 22 May 2002 01:23


All times are GMT +1. The time now is 12:01.