Go Back   Horizons Unlimited - The HUBB > 4 wheels > Equipping the Overland Vehicle
Equipping the Overland Vehicle Vehicle accessories - Making your home away from home comfortable, safe and reliable.
Photo by Daniel Rintz, Himba children, Namibia

The only impossible journey
is the one
you never begin

Photo by Daniel Rintz,
Himba children, Namibia



Overlanders Handbook - everything you need to know, available NOW!

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 7 Dec 2006
Registered Users
HUBB regular
 
Join Date: Mar 2004
Location: Carlsbad, CA, USA
Posts: 27
Mitsubishi Canter/FG 140 4x4 buildup

We are building a Mitsubishi Canter/FG 140 4x4 for overland travel.

Main project site:
http://www.hackneys.com/mitsu/

Buildup photos:
http://www.hackneys.com/mitsu/index-buildup-photos.htm

Comments and feedback are welcome.

__________________
www.hackneys.com/travel
Reply With Quote
  #2  
Old 8 Dec 2006
Gipper's Avatar
Contributing Member
Veteran HUBBer
 
Join Date: Mar 2004
Location: Saltspring Island,Canada/Poole,UK
Posts: 1,081
Hi Douglas,
An Interesting well thought out conversion with a very good use of space - with a GM/Ford/Dodge dually you would have no room for the bikes and as you know a trailer on a long trip is a real liability with a long wheelbase.

Im sure you are aware of the ramp angle you have - the side lockers look quite low slung - are the fuel tanks recessed up a little so they are not the first thing to touch down ?

Also over Bad washboard/corrogations is there/will there be any contact between the bigfoot and the bike garage area - is there much movement ?

I couldnt tell from the photos - but is the chassis area around the fuel tanks reinforced at all - there will be a lot of loading on this area - or is it pretty beefy ?

Other than that - the Winch Cables- with a fairly heavy vehicle (any vehicle for that matter - but heavier vehicles load the cables up if badly bogged) I hate to see wire rope used these days - Cables IMO are bloody dangerous - having seen quite a few part and cause a lot of damage (fortunately only to vehicles)- they also splinter,kink,freeze up (and your hands), are heavy and you need heavy roller fairleads which dont do anything for approach/departure angles.

I would consider swopping them for some Synthetic Rope - stronger, easy to handle and spool in, wont freeze, doesnt kink, is much lighter and if it does break it will go dead and wont whip like wire rope - much much safer.

use it with alloy fairleads - probably save you 100 lbs ish in weight between the cables and fairleads.
Try these guys:

http://www.okoffroad.com/

Keep us posted with any updates/testing - great website !!!

Cheers
Grif
__________________
Cheers
Grif

'11 KTM 450 EXC
'09 Suzuki DR650
'00 Discovery Series 2 V8
'95 Defender 90 300 Tdi Overlander
http://gipperstravels.blogspot.ca

Last edited by Gipper; 8 Dec 2006 at 05:51.
Reply With Quote
  #3  
Old 8 Dec 2006
Registered Users
Veteran HUBBer
 
Join Date: Jun 2002
Location: Southern England
Posts: 205
The small tyres and modest angles/ground clearance will restrict your options for exploring off the beaten track. Can you fit larger diameter tyres ? Also, do you really need two bikes ? You could save a lot of weight by taking only one. As for tyres I would choose Michelin XZY over any other type for this type of journey - they are pretty well bombproof. The cab access step looks a bit vulnerable, maybe consider a folding (Land Rover) type ?

Good luck with the trip.

Andrew.
Reply With Quote
  #4  
Old 8 Dec 2006
Registered Users
Veteran HUBBer
 
Join Date: Jun 2002
Location: Southern England
Posts: 205
Why not take one motor bike and one push bike ?
Reply With Quote
  #5  
Old 8 Dec 2006
Registered Users
HUBB regular
 
Join Date: Mar 2004
Location: Carlsbad, CA, USA
Posts: 27
Quote:
Originally Posted by Gipper
are the fuel tanks recessed up a little so they are not the first thing to touch down ?
On this chassis, the lowest points are the diffs and the transfer case. We staggered up the fuel tanks and the side storage boxes so each gets progressively higher off the ground as you move away from the centerline.


Quote:
Originally Posted by Gipper
is there/will there be any contact between the bigfoot and the bike garage area - is there much movement ?
There is a lot of movement by the camper. It is mounted on a three point pivot frame. The pivot frame pivots at the rear and is rigidly mounted at the camper/garage junction. The clearance between the garage & camper is fairly tight, but the photos are deceiving because the camper has a sloping rib that runs up under the berth that makes it look tighter than it actually is. Still, we are putting some rubber bump stops there. On our recent beta test one there was no contact, even at full articulation.



We plan to put motorcycle shocks on the rear of the pivot frame to dampen some of the lateral motion by the camper & upper boxes (which are also mounted to the pivot frame.)

Quote:
Originally Posted by Gipper
but is the chassis area around the fuel tanks reinforced at all
We extended the frame about .5 meter / 18" to accomodate the camper. That section is boxed rather than the stock C channel, and we believe it to be the strongest part of the frame. The dual saddle fuel tanks mount under the garage along the frame rails, which includes this section.


Quote:
Originally Posted by Gipper
I would consider swopping them for some Synthetic Rope - much much safer.
I agree. Until we did our initial training / beta test last week I had zero knowledge on winches/recovery/etc. After working with the wire rope our trainer recommended we change to synthetic. I've got some on order.

Quote:
Originally Posted by Gipper
great website !!!
Thanks. I'm trying to make this an "open source" project. I couldn't find much out there on this chassis when I started, so I'm attempting to leave behind as much info as possible for those considering a buildup of any chassis in general and the Canter/FG in particular.
__________________
www.hackneys.com/travel
Reply With Quote
  #6  
Old 8 Dec 2006
Registered Users
HUBB regular
 
Join Date: Mar 2004
Location: Carlsbad, CA, USA
Posts: 27
Quote:
Originally Posted by Andrew Baker
The small tyres and modest angles/ground clearance will restrict your options for exploring off the beaten track.
I agree with the characterization of this chassis as "a delivery vehicle that can operate in unpaved areas." The small tires, low diffs and transfer case will always limit it, especially in soft sand and deep mud. We chose the chassis specifically as a "base camp" concept, in other words, take us as far as it can or we are comfortable driving it, then get on the dirt bikes to explore further. This will inherently prevent us from reaching truely remote areas with the chassis & camper. To acheive true "go anywhere" capability we felt we'd have to move up to a larger chassis, i.e. MOG.

Quote:
Originally Posted by Andrew Baker
Can you fit larger diameter tyres ? As for tyres I would choose Michelin XZY over any other type for this type of journey - they are pretty well bombproof. ?
I don't know much about tires in this area, but have had the XZYs recommended to us and did a bit of research on them. (the brochures and specs for the stock tires and the XZYs are on the web site at: http://www.hackneys.com/mitsu/index-chassis-photos.htm

At the last possible moment I had our fabricator modify our spare tire storage compartments to fit the XZYs, but we haven't tested them. I have my doubts they will fit laterally in the compartments.



The XZYs are 3" taller and would give us 300 lbs. more axle capacity on the front. They are not readily available in the US, so we would need to source them out of Canada, most likely as take-offs of their Army's G-Wagons, or from NZ/OZ or Europe.

Quote:
Originally Posted by Andrew Baker
Also, do you really need two bikes ? You could save a lot of weight by taking only one.
Agreed. We'd save 238 lbs. We may be precluded from taking two due to weight considerations alone. Another complication is crossing land borders with three vehicles and two people.

Quote:
Originally Posted by Andrew Baker
The cab access step looks a bit vulnerable, maybe consider a folding (Land Rover) type
That is a great suggestion! Thanks! Appreciate all of the feedback.
__________________
www.hackneys.com/travel
Reply With Quote
  #7  
Old 8 Dec 2006
Registered Users
Veteran HUBBer
 
Join Date: Jun 2002
Location: Southern England
Posts: 205
XZY's are available in the UK new (ex military, but brand new) from VASS. About £50 apiece. They are also available in 17.5 and 20 inch sizes (but not from VASS).

Andrew
Reply With Quote
  #8  
Old 6 Jun 2007
Registered Users
HUBB regular
 
Join Date: Mar 2004
Location: Carlsbad, CA, USA
Posts: 27
Project Complete

Project complete Sunday 3 June, 2007 ~8PM PDT / 0300 GMT / Zulu

rollout shot:


Project: Hackney Expedition Vehicle
Goal: Self-sufficient, Self-Extracting Global Expedition Vehicle
Mission: 2 - 3 years of unsupported exploration primarily in developing countries

Project time: One year
Build time: Nine months

Project type: Private
Funding: Privately funded, no commercial sponsorships, endorsements, financial or product support

Concept design: Douglas Hackney - inspired by an FG/Bigfoot design of Carl Hunter
Bumpers, frame extension, pivot frame, storage box, etc. design and implementation: Mark Johnson
Electrical, plumbing, electronics, etc. systems design and implementation: Douglas Hackney
Custom storage boxes: Fleet Metal Box
Powder Coating: Jerico Metal Fabrication and Powdercoat

Chassis: 2007 Mitsubishi Fuso FG 140 4x4
Camper: 2006 Bigfoot 20C10.11FR

Engine type: DOHC 4-stroke cycle, water-cooled, turbocharged, intercooled diesel
Power: 147 HP @2700 RPM / 108.12 KW
Torque: 347 ft/lb (lbf/ft) @1600 RPM / 47.97 kgf/m
Displacement: 299 c.i. / 4.899 liters
Bore/Stroke: 4.49x4.72" / 114x120mm
Drivetrain: four wheel drive, manually selected, dual range
Front axle: open
Rear axle: limited slip
Transmission: 5 speed manual
Overall gear ratio (1st Gear - Low 4 Wheel Drive): 64.2:1

Top speed: ~75 m.p.h. / 120.70 k.p.h.
Cruising speed: 60 m.p.h. / 96.56 k.p.h.

Tires: Mud & Snow Yokohama Y-7428 LT742 235/85R16; 3 polyester plies sidewall, 2 steel plies tread
Spare tires & wheels: two

Overall length: 27.17' / 7.98 meters (tip of front bumper to rear bumper)
Overall height: 12.04' / 3.67 meters
Overall width: 8.58' / 2.62 meters (rub rail to rub rail)
Front axle track: 65.6" / 166.62cm
Centerline to centerline rear duals: 10.75" / 273.05mm
Outer edge of tire tread to outer edge of tire tread - front: 71.75" / 1822.45 mm (stock tires)
Outer edge of tire tread to outer edge of tire tread - rear: 79.00" / 2006.60mm (stock tires)
Wheelbase: 154" 12' 10" / 3.91 meters
Turning radius: 28.2' / 8.56 meters (outer tread edge of outer front tire)
Mid Wheelbase ground clearance: 15" / .381 meters (stock tires)
Minimum ground clearance: 12.5" (xfer case skid plate) / .318 meters (stock tires)
Front differential ground clearance - max load: 8.5" / 215.9mm (stock tires)
Rear differential ground clearance - max load: 7.625" / 193.68mm (stock tires)
Horizontal centerline front differential, max load: 14.375" / 365.13mm (stock tires)
Horizontal centerline rear differential, max load: 14.125" / 358.78mm (stock tires)
Breakover: 79 degrees (from vertical at mid wheelbase), 11 degrees from wheels (stock tires)
Approach angle: 29.4 degrees (to front cab step) (stock tires)
Departure angle: 17.1 degrees (to departure caster wheels) (stock tires)
Top of rear wheel to box: 7.25" / .184 meters (stock tires)
Bottom of frame rail to ground @ rear axle: 26.5" / .673 meters (stock tires)
Bottom of frame rail to ground @ front axle: 29.5" / .749 meters (stock tires)

Chassis (everything except the camper) % of total weight: 63%
Camper % of total weight: 37%
Front axle % of total: 36%
Rear axle % of total: 64%
Left side % of total: 51%
Right side % of total: 49%
Left front % of total: 19%
Right front % of total: 17%
Left rear % of total: 33%
Right rear % of total: 30%

Center of gravity behind front axle: 98.14" / 249.28cm
Center of gravity from passenger outer tread: 36.19" / 91.92cm
Center of gravity height: 58.92" / 149.657cm (estimated based on tilt test)

Maximum left roll angle: 31.12 (estimated based on tilt test)
Maximum right roll angle: 31.56 (estimated based on tilt test)
Maximum back roll angle: 43.48 (estimated based on tilt test)
Maximum front roll angle: 59.02 (estimated based on tilt test)

Shocks: Bilstein
Springs: Deaver
Rear sway bar: 1.25" / 31.75mm x 36" / 91.44cm

Camper & storage box frame: three point pivot
Pivot frame suspension: 50/50 Fox shocks

Fuel capacity: ~100 gallons / 378.54 liters
Range: >1,000 miles / 1,609 kilometers
Fuel tanks: dual saddle
Fuel filters: dual one micron with online hot swap backup
Genset fuel rate: ~.2 gallons / .76 liters per hour

Air compressor: 4 cfm / 113.27 liters per minute
Air tank: 4 gallon / 15.14 liters
Maximum system working pressure: 150 psi / 1034 kpa / 10.34 bar
Air seats: dual, 3" stroke, 5 air bladders, heated
Air horns: triple, 152 decibels

Drinking water capacity:
Raw, filtered & unsterilized: ~45 gallons / ~170 liters
Fresh, filtered & sterilized: 33 gallons / 125 liters
Total: ~78 gallons / ~284 liters
Gray water: 32 gallons / 122 liters
Black water: 32 gallons / 122 liters
Macerator pump output hose: 75 feet / 22.86 meters

LP capacity: ~20 gallons / 75.7 liters

House bank batteries: 840 amp hours
House bank dedicated alternator: 135 amps
Solar panel output: 19 amps

External AC input: 120/220 VAC / 60HZ, 30 amps single phase
Guest power output: 120/220 VAC / 60 HZ, 20 amps single phase
Diesel genset: 30 amps 120V single phase
Inverter: 3000 watts, 120V single phase

Raw water input: any fresh water source
Drinking water filtration: <1 micron
Drinking water purification: activated charcoal, Ultraviolet light sterilization
Input pump rate: 7 gallons per minute / 26.5 liters per minute

Internet access: global
Bandwidth: >200kbs
Voice communications access: dual global, cab and camper external antennas for primary, camper external antenna for backup
Local voice communications: GSM 3G
Low data rate access: global
Emergency Beacons: EPIRB 406 MHZ global
Radios: VHF (bike to bike, bike to truck), CB (US band)
GPS: one fixed, three portable, cab and camper external antennas

Front winch: 16,500 lbs. / 7,484 kilos
Rear winch: 16,500 lbs. / 7,484 kilos

LAN: Gigabit Ethernet
WLAN: 802.11g
Data storage: 2TB configured as 1.5TB RAID5
Document handling: color scanner/copier/ink jet printer 8.5x11" / 21.59x27.94cm
Photo printing: 4x6" / 10.16x15.24cm dye sublimation

Cab video: DVD playback, rear color camera w/microphone
Cab stereo: 300 watts, four 4.5" / 114.3mm drivers, one 10" / 254mm subwoofer
Camper stereo: 70 watts, four 5.25" / 133.35mm drivers
Camper TV: 25" / 63.5cm LCD HD (US standard ATSC)
Camper TV sound: 5 channel Dolby/DTS wireless headphones
Camper TV playback: upconverting DVD
iPod integration: cab and camper

Berth: fixed ~60x80" / 152.4cm/203.2cm
Head: dry, fixed shower
Range/cooktop: three burner
Oven: convection microwave
Furnace/heater: 30,000 BTU
Water heater: 6 gallons / 23 liters
Refrigerator (3 way: LP, 12VDC, 120VAC): 6 cf / 169 liters
Air conditioner: 11,000 BTU
Galley sink: dual
Integrated exterior LP Grill: 12,000 BTU stainless steel

Primary chassis materials: steel, stainless steel, aluminum
Primary camper materials: chopped mat fiberglass & wood ply sandwich cored with injected foam, wood, single layer fiberglass
Camper glass: dual pane

Camper leveling jacks: electric / manual
Fire extinguishers: Four ABC type (cab - 1; storage boxes - 1, camper - 2)
Ditch bags: two
Vehicle recovery kits: one
Winch line extensions: two
Winch anchor: 14,000 lbs / 6,350 kg capacity
Hand tools: ax, cross bow saw, pick, short and long shovel, pry bar
Pneumatic impact wrench: 1/2" / 12.7mm 500 ft/lb / 69.13 kgf/m

Locking external storage capacity: 268.01cubic feet / 7.59 cubic meters / 7,589 liters
Camper internal storage: 92.98 cubic feet / 2.63 cubic meters / 2,633 liters
Total storage: 360.99 cubic feet / 10.22 cubic meters / 10,222 liters
Auxiliary vehicle storage capacity: two motorcycles up to 94" / 238.76 cm long and 48" / 121.92cm high (taller bikes can be accommodated if you compress the forks)

Other views just prior to completion (missing some box corner / stone guards):















Project buildup photos are at:
BEV Buildup Photos
__________________
www.hackneys.com/travel
Reply With Quote
  #9  
Old 6 Jun 2007
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Scotland
Posts: 775
Wow! Impressive built and great engineering concept. And an internet cafe on wheels to boot! Pity it's bound only for tarmac roads...
__________________
----------------
Roman (UK)
Reply With Quote
  #10  
Old 6 Jun 2007
Registered Users
HUBB regular
 
Join Date: Mar 2004
Location: Carlsbad, CA, USA
Posts: 27
Quote:
Originally Posted by Roman View Post
Pity it's bound only for tarmac roads...
Roman,

The FG is basically a delivery truck capable of use in unpaved areas. We see it as a two-track type of vehicle. Roads of a type that in the US would be ungraded fire roads in the Western mountains. The small wheel size, dual rear wheels and limited ground clearance inherently limit the chassis. Our weight and ~59"/ ~150cm CG location also limit us in terms of roll angle.

Having said that, we know of very experienced 4x4 people who are out in this chassis who go to some amazingly rugged places with their FG. We are not experiened 4x4 people, so we'll take it as far as we are comfortable and then get on the two dirt bikes we carry inside.

So, not limited to tarmac, but certainly limited, at least for us, to reasonable two-tracks. That was our design brief for this project, so we are happy with those results.

We've spent a lot of time motorcycling in developing economies, so we knew the type of roads we were building the truck for. We're not looking to go where no vehicle has gone before with the truck. We'll get on the dirt bikes for that type of work.

And stepping back a couple of levels of abstraction, the FG is not a poor man's MOG or even a Defender on steroids, and I think that people can set themselves up for disappointment if they mentally develop that implementation model for this chassis. For what it is, it is a fantastically capable platform, but I think it is important to work within its capabilities and potential.

Doug
__________________
www.hackneys.com/travel
Reply With Quote
  #11  
Old 6 Jun 2007
Registered Users
Veteran HUBBer
 
Join Date: Apr 2001
Location: Scotland
Posts: 775
Doug,

I think I am going to like the idea of a comfortable, versatile mobile base from which to continue exploration on two wheels.

You've certainly done a great job and it shows in the pictures and descriptions.

As far as I am concerned, having grown used to carrying only the essentails, I can't even imagine how great it would be to achieve such a high level of autonomy.
__________________
----------------
Roman (UK)
Reply With Quote
  #12  
Old 6 Jun 2007
Registered Users
Veteran HUBBer
 
Join Date: Feb 2007
Location: Ghana
Posts: 289
Pretty amazing!

Doug, that vehicle looks quite amazing - hell off a job building it. Is that a "S Class type" infra-red camera arrangement in the cab in the picture?

And the specifications of the data storage and sound system (alongwith everything else) - wow! Your project is bigger in many ways than most peoples houses :-)

Can I ask with such an obviously valuable vehicle and kit how do you approach the issue of vehicle security and not having someone drive away with it...

Best of luck,
Gil
Reply With Quote
  #13  
Old 6 Jun 2007
Registered Users
HUBB regular
 
Join Date: Mar 2004
Location: Carlsbad, CA, USA
Posts: 27
Quote:
Originally Posted by gilghana1 View Post
Doug, that vehicle looks quite amazing - hell off a job building it. Is that a "S Class type" infra-red camera arrangement in the cab in the picture?
No, it's the display screen for the cab Pioneer stereo system. It does display the rear mounted video camera while in reverse or when you select that display.

Quote:
Originally Posted by gilghana1 View Post
And the specifications of the data storage and sound system (alongwith everything else) - wow! Your project is bigger in many ways than most peoples houses :-)
We sold our house and will be living full time in this rig for 2-3 years, so we often chose capability and comfort over maximum off-road capability. I've spent many, many, many nights camping off of a motorcycle and we spent a year traveling in developing economies two-up on a bike so we've lived the Spartan travel life before. We thought we'd do things differently for this chapter.


Quote:
Originally Posted by gilghana1 View Post
Can I ask with such an obviously valuable vehicle and kit how do you approach the issue of vehicle security and not having someone drive away with it...
I could tell you the specifics, but then I'd have to kill you... 8^)

Actually, we've found the world outside the US to be a very welcoming and generally safe place. We rely on using our common sense, listening to our gut and taking some reasonable precautions.

My more detailed thoughts on security and danger are here: Hackney Travel Danger
__________________
www.hackneys.com/travel

Last edited by Douglas Hackney; 6 Jun 2007 at 23:35.
Reply With Quote
  #14  
Old 6 Jun 2007
roamingyak's Avatar
Registered Users
Veteran HUBBer
 
Join Date: Sep 2001
Location: Portugal
Posts: 1,134
Doug,

Far too much info for me to read through, so you may have sorted out a good solution, but my thought was how easy it would be to smash in one of your windows and climb into the back.

Grills or reinforced windows might be a good idea for when your out on the bikes. Also your front spot lights might not last long in places I have been (though again I don't know where your plnning to use this).

Just a thought...
__________________
Kiwi, 7 years around Africa. Overlanding channel:https://www.youtube.com/c/roamingyak
Reply With Quote
  #15  
Old 7 Jun 2007
Registered Users
HUBB regular
 
Join Date: Mar 2004
Location: Carlsbad, CA, USA
Posts: 27
Quote:
Originally Posted by roamingyak.org View Post
Grills or reinforced windows
Agreed. We put grills on the skylights and reinforced the windows.


Quote:
Originally Posted by roamingyak.org View Post
Also your front spot lights might not last long in places I have been.
Also agreed. Several people have commented on that. We plan to do some risk mitigation work on the exterior lights before we leave.

Quote:
Originally Posted by roamingyak.org View Post
Just a thought...
Very much appreciated. We knew nothing about overlanding a year ago when we started this and know little more now. What little we do know we've learned from people like you who are willing to share their experiences and provide suggestions and constructive criticism.

Doug
__________________
www.hackneys.com/travel
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mitsubishi l200 simplemind Equipping the Overland Vehicle 1 26 Jan 2005 02:47
selling Mitsubishi Pajero in Burkina Faso earthworm North Africa 0 22 Dec 2004 00:37
Mitsubishi Delica danielsprague Equipping the Overland Vehicle 3 8 Jul 2004 16:46
Mitsubishi Delica, who knows them?? Timido Equipping the Overland Vehicle 0 7 May 2004 04:27

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.

2024:

Add yourself to the Updates List for each event!

Questions about an event? Ask here

HUBBUK: info

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 10:40.